Search

Jabsco / Obsolete Products
  Obsolete Products
Obsolete productsThis product is no longer available, the details are provided here for information only.
045 Size Centrifugal AC Motor Pump Unit
Centrifugal Pump
Click to enlarge...
Model No.:50045 Series
Click to enlarge
Technical Data Sheet Technical Data Sheet


Industrial : Industrial filling systems. Can handle diesel fuel, light oils and water. Suitable for circulation duties, flooded suction transfer and wash down.;

Further applications in the industrial, marine, farming & plumbing sectors; see our Bronze range of Flexible Impeller pumps



Features:


• Discharge can be closed without damageto the pump
• Flows up to 50 L/min.
• Pressure up to 0.3 bar (3m H2O).
• Will handle solids up to1mm diameter.
• Will tolerate abrasive wear.
• Non pulsating flow.
• Will handle viscosities up to 100 cP.
• Uses standard IEC motor.


Specifications:
Impeller Bronze.
Motor 180 Watts : 230V : 50Hz : 2 Pole, IEC 72 B3 / B14 63 Frame. Enclosure to IP 55, Manual Reset Thermal Overload, Cap Start and Run. Continuously rated. Motor Options : 180 Watts : 230V : 50Hz : 2 Pole, IEC 72 B3 / B14 63 Frame. Enclosure to IP 55, Manual Reset Thermal Overload, Cap Start and Run. Continuously rated.
Seal Standard mechanical carbon face on ceramic. Butyl Elastomers.
Weight 6.4 kg
Pump Head Bronze.
Temperature Range -20 to 40 °C
Shaft Stainless Steel.
Port(s) 0.75" BSP Internal Thread.

Models:
50045-00-2100

Pump Head Kit (without motor)

50045-2100

Motor Pump Unit


To set correct mechanical seal length, push impeller onto shaft with the set screw facing the plug hole in the body. Press impeller down until the impeller bottoms out against the body. Allow impeller to lift by 1mm ( +/- 0.2mm) and tighten set screw in the impeller to hold in position.

 



Jabsco
Home | Company Profile | Product Information | Our Brands | Events / News | Careers | Contact us
Disclaimer | Use of this website: Legal Conditions | Privacy Policy | Site Map | Login